Telescopic cover Manufacturers in Chennai

Telescopic cover Manufacturers in Chennai
Telescopic cover Manufacturers in Chennai

We are well influential company in Chennai in the field of Telescopic Spiral Cover Manufacturers. For any questions Contact at Prashim Enterprises.

Our Telescopic cover Manufacturers way covers have been developed over many years of close cooperation with the machine tool industry. The steel way covers will protect machine tool bed ways against damage by sward and coolant. They reduce sideways wear, thus maintaining the accuracy of the machine and keeping maintenance cost to a minimum. We offer types that are best for easy replacement as well as ones for heavy duty operating conditions.

Mounting of the cover

For the fixing of the Telescopic cover you can also use external angle fixing, top, side or internal top mounting. It is possible to fasten the smallest section with an extended end plate. Where possible, it is recommended that this application should be avoided as swarf can accumulate between the covers and the extended end plate and so damage the wiper, reducing the effectiveness of the telescopic cover.

Walk-on


  Where Telescopic cover are positioned in areas of access to other parts of the machine, chequer plate can be fixed to the largest section only to allow the operator to stand/walk on the telescopic cover. Any other section should not be stood on.

Access doors


  If it is necessary for maintenance purposes you can use access doors to access the slideways or ball screw without removing the complete telescopic cover assembly, an access doors can be fitted to the large section only.

Extension brackets


  Where the closed length is in excess of the available free length of the slideway, it is necessary to support the telescopic cover using brackets as an extension to the slideways. Where the moving part finishes in close proximity to the end of the slideway, it is necessary to reproduce the cover guide faces of the slideways on the extension brackets to support the covers in their attitude.

Projecting Machine Parts


  Where the telescopic covers are fastened to the moving parts, this part often carries slideway lubrication fittings, slideway wipers and positioning equipment. This effectively moves the largest section drive plate at its distance from the mounting face and consequently increases the length of the largest section. Parts projecting are above and between the machine slideways. Each drive plate has to be cut out to clear any projection within the internal envelope of the telescopic cover sections. It is necessary to indicate any projections.

Visit us in Google Maps

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published.